190 Revolution - View Single Post - megasquirt write-up for w201

Meshuganah · 09-04-2008, 08:51 AM

I am using the same auxilliary air by pass valve, the one that sits in between the runners...its a two wire but is good. Also pressure regulator can stay.
Don't need the cold start valve because the computer will put extra fuel when cold starting.
I am waiting for more brass t'peices so that I can finish the fuel rail and I will put up some pics.
The throttle body has to have a position sensor and I will post that too.
Then it is build and install........
Cheers

	(#128 (permalink))
Meshuganah Junior Member Status: Offline Posts: 52 Join Date: Aug 2008 Location: Sunny Queensland	09-04-2008, 08:51 AM I am using the same auxilliary air by pass valve, the one that sits in between the runners...its a two wire but is good. Also pressure regulator can stay. Don't need the cold start valve because the computer will put extra fuel when cold starting. I am waiting for more brass t'peices so that I can finish the fuel rail and I will put up some pics. The throttle body has to have a position sensor and I will post that too. Then it is build and install........ Cheers