190 Revolution - View Single Post - Is this supposed to be like this...? (pic)

tom_kauf · 10:35 PM

Well, the Larger black rubber hose pushes onto the underside of the Airfilter housing (a round fitting). The little plastic vacuum hose goes just underneath that, where a rubber fitting comes up from the top of the engine (it's slightly larger, so that the vacuum hose fits inside it).
If you can take a pic, that would make it easier. I get my car back in 5-6 days, so I won't be able to show you on mine, until then.

EDIT: I don't think anything needs to be replaced, just put back (from what I saw in the pic).

	(#6 (permalink))
tom_kauf Member Status: Offline Posts: 405 Join Date: Nov 2006 Location: Brisbane, Australia	08-28-2008, 10:31 PM Well, the Larger black rubber hose pushes onto the underside of the Airfilter housing (a round fitting). The little plastic vacuum hose goes just underneath that, where a rubber fitting comes up from the top of the engine (it's slightly larger, so that the vacuum hose fits inside it). If you can take a pic, that would make it easier. I get my car back in 5-6 days, so I won't be able to show you on mine, until then. EDIT: I don't think anything needs to be replaced, just put back (from what I saw in the pic). 1985 190E, 280,000km, White, Blue Cloth Interior, Kenwood/Alpine/Blaupunkt Sound System, Yokohama AVS ES100 Tyres, full SecondSkin Sound Insulation, Motorola Voice Recognition Car Kit, Navman F20 GPS Navigation, all Royal Purple Fluids (except Engine Oil, it was getting a bit too expensive at US$80 every few months. And now, diff Oil is gone as well: Mechanic Replaced Diff Seal and I'm sure he wouldn't have used RP) Last edited by tom_kauf : 08-28-2008 at 10:35 PM.